Abstract

A novel (TaWZrHf)95Y5 refractory high-entropy alloy (RHEA) matrix was fabricated via vacuum hot pressing (VHP) sintering and subsequently modified through laser remelting (LR) surface treatment. Thermodynamic phase diagram calculations predicted the alloy’s dual-phase BCC structure, and the effects of LR on phase composition, microstructure, and mechanical properties were systematically investigated. LR induced a significant phase transition, promoting rapid solidification and substantial grain refinement. The surface hardness increased to 848 HV0.2, approximately 1.5 times higher than that of the matrix, while the compressive strength reached 1635 MPa, surpassing the matrix by 200 MPa without compromising ductility. Importantly, the LR process effectively mitigated rare-earth (yttrium) segregation and loss, a common challenge in conventional arc melting of refractory HEAs, thereby enhancing solid solution strengthening and phase stability. This work pioneers the application of laser surface engineering to VHP-sintered refractory HEAs, bridging critical gaps in fabrication, microstructural optimization, and performance enhancement, and offering valuable insights for the future design of high-performance multi-principal element alloy development.

IPC Classification

Keywords