Archive/Enhanced Thermal Stability in Compact ASE Sources Enabled by Optimized Erbium-Doped Fiber Design
Enhanced Thermal Stability in Compact ASE Sources Enabled by Optimized Erbium-Doped Fiber Design
Jianming Liu, Wenbin Lin, Wei Liu et al.
April 24, 2026
en

Abstract

Amplified Spontaneous Emission (ASE) sources are widely employed as highly stable broadband sources in fields such as high-precision navigation and optical detection. Erbium-doped fiber (EDF), as the core active component in ASE sources, has long been a key subject of thermal stability research. We fabricated a low-doped EDF with an 80 μm-cladding using the vapor phase doping (VPD) technique. This EDF was compared with a commercial 125 μm-cladding EDF using a double-pass forward (DPF) optical path configuration with a narrowband filter. We investigated the temperature-dependent characteristics of the ASE spectra generated by the two EDFs with different parameters. The temperature drift performance of the two EDFs was analyzed based on three critical indicators of the spectrum: mean wavelength, spectral bandwidth, and output power. In comparison with the commonly used EDF, the results show that a properly designed small-cladding EDF with an appropriate length can deliver higher ASE output power and exhibit a lower mean-wavelength temperature drift. This study provides an important guideline for promoting the miniaturization of high-precision fiber-optic sensing devices.

IPC Classification

B60H01

Keywords

enhancedthermalstabilitycompactsourcesenabledoptimizederbium-dopedfiberdesignphotonicsamplifiedspontaneousemissionwidelyemployedhighlystablebroadbandfieldssuchhigh-precisionnavigationoptical
Reference this publication

€ 4.00