Abstract

The instability of marine low-sulfur fuel oil caused by asphaltene precipitation poses significant operational challenges in the shipping industry. This study systematically investigates the dispersing effects of biodiesel derived from three different feedstocks—palm oil, waste cooking oil (WCO), and microalgae oil—and their individual fatty acid methyl ester components on asphaltenes extracted from VLSFO. Biodiesel was selected as a dispersant due to its renewable nature, polar ester functional groups, and variable unsaturation levels, which enable favorable interactions with asphaltene molecules through hydrogen bonding and π-π stacking. Using UV–Visible spectrophotometry, the dispersion performance was quantitatively evaluated under various conditions including dispersant concentration, temperature, storage time, and molecular structural characteristics. The results demonstrate that microalgae oil biodiesel exhibits the most superior asphaltene dispersion capability among the three biodiesels, with a dispersion improvement index of 35% at 12 g/L, compared to 28% and 22% for waste cooking and palm oil biodiesels. Optimal performance is achieved at 80 °C, where the asphaltene concentration increases by 68% relative to the control, and remains stable within the first 10 days of storage but deteriorates significantly after 30 days due to oxidative degradation. Among individual FAME components, the dispersion effectiveness increases with alkyl chain length from C10 to C20, with the latter reaching a 30% improvement index. Functional group polarity plays a critical role, with carboxylic acid exhibiting a 45% improvement at 14 g/L, substantially outperforming alcohol at 32% and ester at 28%. The degree of unsaturation further enhances dispersion, as the improvement index rises progressively from 20% for saturated methyl stearate to 42% for tri-unsaturated methyl linolenate, representing a 2.1-fold increase. Dynamic light scattering (DLS) measurements confirm that biodiesel addition reduces asphaltene particle size from the micrometer range of 2 to 5 μm down to submicron levels of 200 to 500 nm, while microscopic observations reveal inhibited aggregation. These findings provide theoretical foundations for biodiesel application in marine fuel systems.

IPC Classification

Keywords