Abstract

This study examines the influence of the chemical nature and molecular structure of external electron-donor compounds on the slurry synthesis of isotactic polypropylene in a hydrocarbon diluent using a titanium–magnesium Ziegler–Natta catalyst. Propylene polymerization was carried out at constant temperature, pressure, hydrogen concentration, and fixed molar ratios of the catalyst system components. Alkoxysilanes with different structures were used as external donors: dicyclopentyldimethoxysilane, cyclohexylmethyldimethoxysilane, diisobutyldimethoxysilane, and diethylaminotriethoxysilane; di-n-butyl phthalate was used as a reference compound. It was shown that external donors decrease catalytic activity relative to the donor-free system but increase stereospecificity, as indicated by a lower xylene-soluble fraction and a higher isotactic index of polypropylene. Dicyclopentyldimethoxysilane demonstrated the strongest stereoregulating effect, providing the lowest content of xylene-soluble polymer. The donor structure significantly affected the molecular weight, rheological, and thermal characteristics of polypropylene, including melt flow rate, viscosity-average molecular weight, melting temperature, melting enthalpy, and crystallinity. Comparison with literature data for catalyst systems differing in internal and external donors, as well as in synthesis conditions, showed that catalyst activity and the stereospecificity of the catalyst system may be determined not only by process parameters but also by the electron-donor environment of the active sites. The results support established concepts of external-donor action in Ziegler–Natta catalysis and provide a comparative assessment of alkoxysilane donors and di-n-butyl phthalate under slurry polymerization conditions.

IPC Classification

Keywords