Abstract

The growing interest in sustainable materials has stimulated research into bio-based reinforcements. This study investigates the influence of fiber extraction methods on the properties of Carica papaya (CP) pseudostem fibers and on the performance of polyester-based nonwoven composites. Fibers were extracted by water retting (CPFR) and alkaline treatments using 5 wt.% NaOH (CPF5) and 10 wt.% NaOH (CPF10). Preliminary characterization confirmed the suitability of CP fibers as reinforcements for nonwoven composite materials. After carding, the fiber mats were impregnated with unsaturated polyester resin (UP), consolidated by compression molding, and post-cured in an oven. The experimental results showed that alkaline extraction significantly improved fiber–matrix adhesion and reduced water uptake. CPF10UP exhibited the lowest porosity (12.7%) and water absorption (2.62%). CPF5UP provided the best overall mechanical performance, achieving the highest tensile and flexural properties compared with neat polyester resin. In contrast, CPF10UP maximized tensile stiffness, impact resistance, and thermal stability. Radar chart analysis revealed two distinct optimization strategies: CPF5UP for superior mechanical performance and CPF10UP for enhanced moisture resistance and impact durability. Overall, the 5 wt.% NaOH treatment provided the best compromise between strength and stiffness, whereas the 10 wt.% NaOH treatment favored higher rigidity, thermal stability, and water resistance. Derived from agricultural waste, CP fibers demonstrate strong potential for semi-structural automotive interior components, particularly door panels, while supporting circular economy principles and sustainable material development.

IPC Classification

Keywords