Abstract

Distributed-drive all-wheel steering (AWS) six-axle vehicles possess distinct advantages in power performance, maneuverability, and environmental adaptability. However, when navigating tight curves under sudden low-friction road conditions, their inherent long wheelbase and strong inter-axle coupling typically lead to compromised spatial maneuverability, trajectory decoupling between the vehicle nose and tail, and lateral dynamic instability. To resolve these critical issues, this paper proposes a geometry–dynamics coupled lateral control scheme with adaptive speed planning for six-axle vehicles under confined spatial and low-friction conditions by seamlessly fusing a dual-point preview mechanism with multi-mode steering mappings. First, a three-degree-of-freedom nonlinear vehicle dynamic model incorporating longitudinal, lateral, and yaw motions is constructed, alongside the formulation of extended Ackermann kinematic steering manifolds for three distinct modes: rear-axle steering, center steering, and crab steering. To rectify the kinematic under-constrained deficiency inherent in conventional single-point preview path-tracking architectures, a joint front-and-rear dual-point preview constraint mechanism is established. This framework permits the quantitative derivation of a spatial geometric reconstruction method for the instantaneous center of rotation (ICR), which algebraically maps the ideal ICR trajectory requirements onto the physical constraints of the selected steering modes. Consequently, complete geometric constraints on both the front and rear trajectories are achieved, enabling active compression of the vehicle’s turning radius. Furthermore, to handle sudden low-friction disturbances, road adhesion limits and vehicle lateral stability boundaries are explicitly incorporated to design a multi-scale adaptive preview distance dynamic scaling mechanism driven by dynamic safety margin corrections. By adaptively scaling the spatial constraint at the geometric layer, this mechanism proactively mitigates nonlinear tire sideslip force saturation via feedforward action, thereby preventing tracking divergence and catastrophic sideslip instability under physical adhesion limits. Co-simulations based on the high-fidelity TruckSim-Simulink platform demonstrate that, in standard curves, the proposed dual-point preview manifold fusion strategy reduces the minimum turning radius by 9.6–10.1% and shortens the cornering transit time by 7.5% compared with the traditional single-point preview mechanism. By actively constraining the front and rear trajectories, the trajectory decoupling between the vehicle nose and tail is effectively resolved. Under narrow-lane scenarios, the maximum lateral error is restricted within 0.78 m, representing a 37.6% reduction relative to the single-point preview, while the maximum steering angle of the front axle is compressed by approximately 18%, thereby significantly improving spatial passability and preventing intermediate body interference. Most notably, under low-friction surface disturbances, the dynamic-margin-corrected adaptive preview adjustment mechanism exhibits remarkable robustness, constraining the maximum lateral tracking error to within 0.68 m. The proposed geometry–dynamics coupled lateral control strategy successfully elevates the tight-curve maneuverability of heavy transport vehicles while concurrently reinforcing their lateral dynamic stability under limit combined spatial and adhesion constraints.

IPC Classification

Keywords